Hot oil testing machine

PCB热油试验机

型号:RAY-500T

客户实验室实物图 Customer laboratory physical figure

容积、尺寸和重量 Volume, size and weight

夹具 fixture

PCB测试专用夹具 PCB test special fixture

高温槽尺寸

High temperature slot size

W300×D210×H330㎜ (可按客户要求Customized）

低温槽尺寸

Low temperature slot size

W300×D210×H330㎜ (可按客户要求Customized）

机台  尺寸 The machine size

W1530×H1960×D1003mm

重   量 Wight

约500 kg

性能 Performance

2.1. 测试环境条件

Test environment conditions

环境温度为+25℃、相对湿度≤85%、试验箱内无试样条件下

Environment temperature is 25 ℃, relative humidity of 85% or less, test under the condition of no sample in the box

2.2. 测试方法 The test method

GB/T4677-2002 9.2.1  IPC-TM-650 2.4.6等测试方法

2.3. 温度范围Temperature range

高温桶：常温~320℃(电热管采用专用#316 材质)

低温桶：20~ 25℃(采用压缩机系统恒温)

2.4. 温度波动度Temperature fluctuation degree

高温槽：当被测物浸入槽内，温度波动为 －5.0℃Analyte high temperature trough: when a slot, temperature fluctuations is 5.0 ℃

低温槽：当被测物浸入槽内，温度波动为 ＋5.0℃Analyte cryogenic tank: when immersed in the tank, the temperature fluctuation is + 5.0

2.5. 温度均匀度

Temperature uniformity

高温槽：± 5.0℃

低温槽：± 5.0℃

3. 结构特征Structural features

3.1. 保温维护结构The maintenance structure heat preservation

外壁材料：特殊钢板 + 粉体烤漆

The outer wall material: special steel + powder paint

内壁材料：专用SUS304不锈钢板

The lining material: special SUS304 stainless steel sheet

高温桶保温材料：高密度树脂棉High temperature bucket of thermal insulation material: high density resin cotton

3.2. 高温槽加热器

High temperature tank heater

定制进口镍洛丝加热器Custom import nickel wire heater

加热器控制方式：无触点等周期脉冲调宽，SSR（固态继电器）

Heater control mode: non-contact cycle such as pulse width, SSR (solid state relay)

3.3. 脚轮及支撑脚：4套

Caster wheel and supporting feet: 4 sets

沉重轮Heavy wheel

3.4. 门Door

双开全透明钢化玻璃门Double transparent toughened glass door open

3.5. 铰链Hinge

加厚双合叶铰链Thickening double hinges hinge

3.6. 门锁 Door lock

高端镀锌带钥匙旋转锁High-end galvanized spin lock with keys

3.7. 控制台 Console

控制器显示屏、超温保护设定器、照明灯开关、电源指示灯

The controller display and overtemperature protection setting, lighting switch, power light,

3.8. 试料装置Sample unit

步进移动进口模块，保证试料篮平稳移动，精准放入油槽Step into the mobile import module, ensure smooth movement of the sample basket, precise in the tank

左右位移时间可调:0~180sec

About displacement time adjustable: 0 ~ 180 SEC

上下位移时间可调:0~180sec

Up and down displacement time adjustable: 0 ~ 180 SEC

浸泡停留时间可调:1~999s Soak time adjustable: 1 ~ 999 s

测试 cycle 数:   0~9999cycle Test cycle count: 0 ~ 9999 cycle

3.9. 储油桶Oil storage barrel

设置于机体右侧内，试验过程中，当高、低温油槽内油操过标准液面时，让多出的油回流到储油桶。Set within the body on the right, during the trial, when the high and low temperature in the tank oil operation through the standard level, let more back into the storage barrels of oil.

4. 制冷系统Refrigeration system

4.1. 工作方式 Way to work

机械压缩双级制冷方式 Mechanical compression double-stage refrigeration way

4.2. 进口高效节能全封闭压缩机Imported high efficiency and energy saving closed compressor

4.3. 制 冷 剂System of cooling

环保型R-404A  R23

4.4. 运动控制 Motion control

P.L.C加人机界面控制P.L.C man-machine interface control

5 使用条件Conditions of use

5.1环境条件

Environmental conditions

温度：5℃～30℃

相对湿度：≤85%

5.2供电条件Power supply condition

电源The power supply

最大电流Maximum current

电源容量Power capacity

AC380V  /60HZ

40A

21KW